The adhesive adopts advanced rubber and high-performance resin and other raw materials, with foreign advanced technology developed, with super strong initial adhesion, adhesion, 3 seconds positioning, can be loaded, no support, long opening time, in 20 minutes can be repeated adjustment of the bonded substrate paste, green environmental protection on the substrate without damage. Professional for bonding all kinds of advertising materials, efficient construction, saving time and labor, convenient and fast,

Scope of application:

Professional suitable for advertising words, infinity words, boutique words, acrylic, mini words, snow words, PVC words, crystal words, metal words, nameplates, signs, light boxes and other bonding or other positioning

Engineering use:

★ First of all, the construction of colloids and contacts without dust, dry without oil;

★ Correct installation and use (as shown below)

★ Extrude colloid in spot or strip shape, paste substrate, and press properly;

★ Weight-bearing substrate, after gluing pressure can be gently opened, cool for 3 seconds, or repeatedly opened 1 to 3 times, and then the two sides of the initial adhesion is better, 12 hours to achieve the use of strength, 72 hours to achieve better strength.

Note:

1. Construction temperature -10℃-35℃, away from fireworks.

2. Avoid excessive inhalation of volatile gases in the curing process, and ventilation should be maintained during construction;

3. This product is not edible, please keep out of reach of children!

4. Avoid direct contact with the skin. If you have allergies and other conditions, please seek medical attention immediately!

5. It must be tested before use, and can be used after achieving the test effect.

6. The product is kept in cool and dry, and the storage temperature is 0℃C-30℃. From the date of production, the storage period is 18 months. This product exceeds the validity period and can be used only after passing the inspection.

The company ensures that the products strictly implement the national quality standards, and all indicators can meet the standard requirements, but based on the differences in the specific conditions of construction (including substrate, construction methods, climate, etc.), pre-testing can ensure that the products meet the specific purpose, and can not be replaced by the information in the manual. Therefore, it must be fully pre-tested and independently determined to achieve satisfactory results before it can be widely used. For the quality problems caused by improper construction or external factors, the loss caused by the company will not be responsible.