Product Characteristics:

LIHAO HIGH TEMPERATURE SEALANTihao 118 is a kind of anti-temperature silicone sealant.sustainability out of -65°C~300'C without affecting theperformance.it can be instantllow to 343 'C high temperature.It has the characteristics olong-lasting elasticity, goodsealing performance at hiahtemperature,hiah electricainsulation performanceexcelent resistance to greaseand vibration.Gap-fillingability, using a wide range otemperatures.high pressureresistance.corrosion resistanceand oil and other workincconditions with the speciacoloid.

Main uses:

It can replace most kinds of rubbelaaskets.asbestos aaskets.corkaaskets and paper qaskets. and caneffectively prevent water, oil and gasleakage, with excellent sealing andanti-leakage effect.

DIRECTIONS FOR USE:

Ensure surfaces are clean anddry and free from grease or oiCut the tip off the cartridge.above the thread.

Cut the tip off the nozzle to thedesired bead size and screwthe nozzle onto the cartridgee.

Apply silicone with a caulkinggun to the surface in a steadvflow at a 45°angle.

Use a flat, wet tool dipped in amild detergentto smoothinconsistencies before skinformation occurs.

Silicone will be fully cured after24 hours.

STORAGE:

Store in a cool, dry place below30°C.

NOTE:

eSilicone is not paintable.

CAUTION:

lt is advisable to wear qloves.Silicone contains chemicalswhich can irritate the skin anoeves.lf contact occurs.rinsethoroughly with warm water andseek medical attention.

Keep out of reach of children.

Ensure qood ventilation if usedindoors.

As this product is used outsideour control.we cannot acceptliabilitv for any loss or damagewhatsoever.