Product Characteristics:

LIHAO ANTI-MOULD COSMETIC ADHESIVENeutral dehydrogenation typegreen,low VOCemission.nontoxic.harmless.formaldehvdefree,non-corrosive,low odorno discoloration.environmentalfriendly and stable during theshelf life, Forms cold and heatresistant elastomers after curingHas excellent resistance toweather, ageing,UVozone andresistance in different temperature.

Main uses:

Various indoor (Includincchildren's room)and outdoorenvironmentally friendly decoration seams,lens bondincadhesive,anti-mould caulkingnon-corrosive crafts productionlarge plate alass bonding andioints, a variety of architecturawaterproofina.weatherprootsealing ofexternalwals.anoa variety of other electroniccomponents bonding.

DIRECTIONS FOR USE:

Ensure surfaces are clean anddry and free from grease or oil.

Cut the tip off the cartridge,above the thread.

Cut the tip off the nozzle to thedesired bead size and screwthe nozzle onto the cartridge.

Apply silicone with a caulkinggun to the surface in a steadyflow at a 45°angle.

Use a flat, wet tool dipped in amild detergent to smoothinconsistencies before skinformation occurs.

Silicone will be fully cured after 24 hours.

STORAGE:

Store in a cool, dry place below30°C.

NOTE:

Silicone is not paintable.

CAUTION:

lt is advisable to wear alovesSilicone contains chemicalswhich can irritate the skin andeves.If contact occurs.rinsethorouahlv with warm water andseek medical attention.

Keep out of reach of children.

Ensure qood ventilation if usedindoors.

As this product is used outsideour control,we cannot acceptliability for any loss or damage whatsoever.